JLG Equipemtne and Parts

Push Around Vertical Lift >  JLG 30AM

Vertical personnel lifts consist of a work platform attached to an aluminum mast that extends vertically, which in turn is mounted on a steel base. The AM Series is a "push-around" machine. Available in various models, these machines can be rolled in their retracted position through standard door openings, yet reach platform heights of up to 41 ft (12.5 m) when fully extended.

JLG takes the personnel lift industry to new heights with AccessMaster (AM Series) push-around personnel lifts. You'll enjoy greater productivity with the highest capacities in the industry and the ability to get closer to your work area. Plus, with a mast guide system that requires no lubrication, a unique power management system and the convenience of the AMI Series outriggerless lifts - AccessMaster push-around lifts provide a whole new level of value and performance.

  • Platform heights from 15 to 41 feet (4.57 to 12.42 m)
  • 30 ft (9.14 m) model (30 AM) rolls through standard doorways without tilt back
  • Common family of quick-change platforms
  • Anodized mast is stiffer, stronger, and maintenance free for life
  • Six-wheel design for increased maneuverability
  • Available on all AM Models is the Straddle Extension Kit
  • The most rigid anodized mast in the industry
  • Six-wheel design for increased maneuverability
  • Long battery duty cycles
  • Can be loaded on a truck by a single person
  • Common family of quick change platforms

Standard Features

Applications for the 30AM

Reach Specification

Dimensional Data

Options

Warranty

Improved Maneuverability and Transport: The JLG six-wheel design gives the AM Series lifts enhanced maneuverability, while the 10 in. (25 cm) wheels provide ease of movement. Models with heights up to 30 ft (9.14 m) roll through standard doorways and into elevators without tilt back, and have an overall length of 47 in. (1.19 cm) for transport in cargo vans or small elevators. All AM models have six-inch-wide (15 cm) fork pockets that allow for convenient loading, and can be loaded on standard size pickup trucks. Plus, new mid-ship tie down points are easier to reach and provide improved protection from chain damage.

Stronger Anodized Mast: Every AccessMaster lift features an anodized mast that is more rigid for less deflection and sway. The mast guide system requires no lubrication for the life of the machine.

Quick-ChangePlatforms: JLG offers a family of quick-change platforms that can be changed in less than one minute without tools, to suit your specific application needs. Choose from our standard oversized gull-wing entry platform measuring 26 x 28 in. (66 x 71 cm) or an optional narrow gull-wing entry platform measuring 22 x 22 in. (56 x 56 cm). Also available for the AMI Series Models only is an optional gull-wing front entry extension platform measuring 26 x 26 in. retracted; 49 x 26 in. extended. All rail heights are 43-1/4 in. (1.09 m). Rail Height of 43-1/4 in. meets OSHA standards.

JLG 30AM Standard Features

  • Low Maintenance Anodized Mast
  • 110 Volt Double Receptacle on Platform
  • Auto Power Saver - Shuts Off Power When Idle
  • Lanyard Attachment Anchor for Body Harness
  • Non-Marking Tires
  • Quick-Change Platform Mounts
  • Quick-Change 28 x 26 in. (71 x 66 cm) - Gull Wing Entry Platform
  • Automatic Battery Charger
  • Battery Discharge Indicator (BDI)
  • Roller Loading Device For Loading On Standard Size Pick Up Trucks

Typical Applications for the JLG 30AM

  • Used for general commercial and institutional maintenance applications in factories, distribution and retail centers, theaters, airports, public buildings, places of worship and entertainment facilities.

DIMENSIONAL DATA

 

Working Height

            

36 ft (10.97 m)

 

Platform Height

 

29 ft 10 in. (9.09 m)

 

Platform Capacity

 

350 lb (159 kg)

 

Platform Dimensions (L x W)

 

 

 

     Standard Platform (Gull Wing Entry)

 

28 x 26 in. (71 x 66 cm)

 

Overall Height - Stowed

 

77.5 in. (1.97 m)

 

Overall Base Width

 

29 in. (74 cm)

 

Overall Base Length

 

52 in. (1.32 m)

 

     - Without Platform

 

47 in. (1.19 m)

 

Overall Height - Tilted Back

 

n/a

 

Overall Length - Tilted Back

 

n/a

 

Ground Entry Height

 

19 in. (48 cm)

 

Outrigger Footprint Length

 

68 in. (1.73 m)

 

Outrigger Footprint Width

 

61 in. (1.55 m)

 

Distance to Wall - Front

 

5 in. (13 cm)

 

Distance to Wall - Side

 

18 in. (44 cm)

 

Gross Vehicle Weight - AC

 

890 lb (404 kg)

 

Gross Vehicle Weight - DC

 

940 lb (426 kg)

 

JLG 30AM Individual Options:

Auxiliary Emergency Lowering Control - Mounted in Platform

Descent Alarm

Extra Power Pack - DC Models Only

Flashing Amber Beacon

Fluorescent Light Tube Caddy1

High Performance Charger with Maintenance-Free AGM Batteries

Lifting Eye for a Crane Hook

Narrow Quick-Change Platform - 22 x 22 in. (56 x 56 cm) - Gull Wing - Front Entry

Security Lock

Straddle Kit - 43 in. (109 cm) Clearance - Includes Ladder

Straddle Kit - 55 in. (140 cm) Clearance - Includes Ladder

Straddle Outrigger Interlock Adapter

Tool Tray - 8 in. W x 18 in. L x 5 in. D (20 x 46 x 13 cm)

Warranty:

The JLG "1 & 5" Warranty: JLG Industries, Inc. backs our products with our exclusive "1 & 5" Warranty. We provide coverage on all products for one (1) full year, and cover all specified major structural components for five (5) years. Due to continuous product improvements, we reserve the right to make specification and/or equipment changes without prior notification. This machine meets or exceeds applicable OSHA Regulations in 29 CFR 1910.67, 29 CFR 1926.453, ANSI A92.3-1990, as originally manufactured for intended applications.

 



   
   
Find Parts Fast


JLG Skytrack