JLG Equipemtne and Parts
This is the Gradall's 534D9-45 Telehandler Product Page

534D9-45 Telehandler

With the strongest boom in it's class and an efficient hydrostatic drive, the Gradall model 534D9-45 can move 9,000-pound loads around with amazing speed and agility - without the need for outriggers. And with a 45-foot lift height and a full range of attachment options, you'll be able to handle a wide variety of jobs. Download Gradall 534D9-45 Telehandler Product Brochure.

Gradall's 534D9 Telehandler
Gradall's 534D9-45 Telehandler
534D9-45 Telehandler by Gradall

Gradall 534D9-45 Features

22% more cab room than before for extra comfort

90 rear-pivot steering

9,000 lb (4,082 kg) capacity

Up to 45 ft (13.7 m) lift height

Ultra-strong boom allows for a full range of attachments

Single joystick control for boom lift and crowd

No-shift hydrostatic drivetrain

Gradall 534D9-45 Technical Specs

Rated Capacity @ 24 in. (610 mm) Load Center = 9,000 lb (4,082 kg)

Maximum Lift Height = 45 ft (13.7 m)

Capacity @ Maximum Lift Height = 7,000 lb (3,175 kg)

Maximum Reach = 31 ft 6 in. (9.6 m)

Capacity @ Maximum Reach = 1,600 lb (726 kg)

Approximate Operating Weight = 24,420 lb (11,077 kg)

Length (Less Forks) = 237 in. (6.01 m)

Width = 97 in. (2.46 m)

Height = 94 in. (2.38 m)

Wheelbase = 135 in. (3.42 m)

Outside Turning Radius = 173 in. (4.39 m)

Ground Clearance = 19 in. (483 mm)

Drive = 4 x 4

Engine = John Deere 4045TF275

HP and RPM = 110 hp @ 2,400 rpm

Transmission = Hydrostatic

Axle - Front = High-Bias, Limited Slip

Axle - Rear = Planetary Hubs

Steering = 90 Rear-Pivot

Tires = 13:00 x 24 - 12PR, G2 type

Maximum Travel Speed = 18 mph (29 kmph)

Frame Tilt Left/Right Frame Leveling = 8 Degrees

 


 

What Can You Do with a Gradall 534D9-45 Telehandler? Gradall telehandlers are widely recognized for their strength, reliability and low cost of ownership. But it's their exclusive 90 rear-pivot steering that sets them apart. And gives you outstanding maneuverability even in the tightest work areas. Operators can take them where other telehandlers can't go. They can turn sharp corners, move down narrow aisles and square-up lumber and block in crowded landing areas with greater speed and accuracy. All with a clear view of the job site from the comfort of a spacious machine cab. Plus, Gradall telehandlers can be equipped with a full range of attachments to handle a wide variety of jobs. For the high level performance you need, there's almost nothing a Gradall Telehandler can't do.

Looking for machine parts? Goldcoast HiLift has an exclusive, state-of-the-art Parts Order System for Gradall 534D9-45Parts.

   
   
Find Parts Fast


JLG Skytrack