JLG Equipemtne and Parts
This is the Lull 944E-42 Product Page

1044C-54 Series II Telehandler

Whether it's general construction, steel erection, masonry or general applications, the strongest and highest reaching Lull model 1044C-54 Series II telehandler can meet the challenge. And even with a 10,000-pound capacity and 54-feet of lift height, the model 1044C-54 Series II still delivers faster and easier load placement with the exclusive horizontal load placement system. Download Lull 1044C-54 Telehandler Product Brochure.

Lull 1044C-54 Series II Telehandler
Lull 1044C-54 Series II Telehandler Boom Side
Lull 1044C-54 Series II Telehandler at Construction Site

Lull 1044C-54 Series II Telehandler Features:

22% more cab room than before for extra comfort

All-wheel steering

6,600 lb (2,994 kg) capacity

42 ft (12.8 m) lift height

Ultra-strong boom allows for a full range of attachments

Single joystick control for boom lift and crowd

Power shift transmission

Lull 1044C-54 Series II Telehandler Technical Specs:

Rated Capacity @ 24 in. (610 mm) Load Center = 6,600 lb (2,994 kg)

Maximum Lift Height = 42 ft (12.8 m)

Capacity @ Maximum Lift Height = 6,000 lb (2,722 kg)

Maximum Reach = 29 ft (8.84 m)

Capacity @ Maximum Reach = 1,000 lb (454 kg)

Approximate Operating Weight = 20,400 lb (9,253 kg)

Length (Less Forks) = 212.6 in. (5.40 m)

Width = 95.5 in. (2.41 m)

Height = 94 in. (2.38 m)

Wheelbase = 128 in. (3.25 m)

Outside Turning Radius = 144 in. (3.65 m)

Ground Clearance = 16.4 in. (416 mm)

Drive = 4 x 4

Engine = John Deere 4045TF150

HP and RPM = 99 hp @ 2,500 rpm

Transmission = Powershift

Axle - Front = High-Bias, Limited Slip

Axle - Rear = Trunnion Mounted Planetary

Steering = All-Wheel

Tires = 13:00 x 24 - 12PR, G2 type

Maximum Travel Speed = 19.5 mph (31.4 kmph)

Frame Tilt Left/Right Frame Leveling = 10 Degrees


 

What Can You Do with a Lull 1044C-54 Telehandler?

80" Horizontal Placement System:The patented horizontal placement system gives Lull telehandlers the unique ability to move an entire load 80 inches horizontally at full height without driving or complex maneuvering. The entire elevating assembly moves from the rear of the chassis towards the front, making it easier to load material onto scaffolding or other elevated work areas with precision.

Precision Control: Lull telehandlers give the operator a level of control unlike any other telehandler. With the precision load placement system and proportional joystick controls, they allow workers to land loads faster and more accurately. With one lever, operators can place a load and withdraw the forks, reducing cycle times and boosting job site productivity.

Looking for machine parts? Goldcoast HiLift has an exclusive, state-of-the-art Parts Order System for Lull 1044C-54 Parts.

   
   
Find Parts Fast


JLG Skytrack